Description
OVERVIEW
The Verus Engineering Full Brake Cooling Kit is configured in an OEM style format, with emphasis on the shortest route possible. Using the OEM fog lights as the inlet to the kit and a well-formed duct in the inner fender line this is the brake cooling kit to have. The kit comes with everything necessary for an install, including pre-cut hoses. The OEM washer fluid reservoir *can be* retained!
During the design process; we utilized in-house scan data to design the components. This resulted in a product that features a near OEM fit and finish.
The Verus brake cooling kit was designed for owners looking to maximize their brake’s cooling efficiency and increase their brake’s ability to do their job.
For complete compatibility, vehicles without OEM fog light bezels will need to purchase OEM, or similar, Fog Light Bezels. We purchased OEM units for around $100 for both sides, and they were paint matched.
WHAT IS INCLUDED
Backing Plate Incl. Carbon Ducts Riveted On (2, LH and RH)
2.5″ Pre-Cut Silicone High Temp Brake Hose (2)
Fender Pancake Duct (2)
3.0″ Pre-Cut Neoprene Brake Hose (2)
3.0″ Stainless Hose Clamp (4)
2.5″ Stainless Hose Clamp (4)
Foglight Duct (2)
Foglight Duct Bracket (2)
Hardware Kit, Includes All Necessary Hardware for Install
FEATURES
Direct Air into the Center of the Rotor
Stainless Backing Plate Adds Even More Airflow into Center of the Rotor
OEM Type Install
Installs in a Few Hours With Minimal Hand Tools and Know-How
Short Routing to Maximum Cooling Efficiency
Pulls Air from High-Pressure Zone in Front Bumper
SPECIFICATIONS
Stainless Backing Plate
Dry Carbon Air Duct
Hard Plastic Fender Ducts (Pancake Duct)
Hard Plastic Fog Light Ducts
Pre-cut 3″ and 2.5″ Brake Duct Hose (Neoprene for Foglight, High Temp Silicone for Backing Plate)
All Necessary Hardware Included
Made in the U.S.A.
SCIENCE
Via tuft testing and thermal image testing, it is clear that the brake cooling kit is highly effective even when used with the OEM rotors which have quite small vanes when compared to those of big brake kits. Smaller vanes will hurt flow and cooling due to the reduced size. With the brake cooling kit, the rotors remained much cooler directly after applying the brakes as well as after a short drive without using the brakes. It is also apparent that at high rates of speed, the brake cooling kit does significantly more than at lower speeds. This makes a lot of sense as the kit works by using frontal ambient air and funneling it into the center of the rotor. At higher speeds, pressure and flow rates are greater than at low speeds. We have heard reports back from customers tracking their cars having reduced brake fade, reduced rotor cracking, improved pad wear, and reduced brake fluid boiling. As a result, this is a great kit to help keep brake components at an appropriate temperature during competition and/or track days.
[expand title=”Click here to read more about Verus Engineering Shipping and Warranty”]
Please contact first to see if we can assist with any issue you have encountered.
SHIPPING
Verus Engineering ships via FedEx and USPS, both domestically and internationally. Estimated delivery times for domestic FedEx shipments are explained in above image.
TRACKING
Verus Engineering sends an email with tracking number for every order placed with a valid email address. Tracking is sent *to the email used during checkout* directly via the carriers. Please check your spam folders and/or your email specifically used during checkout.
ADDRESS CHANGE POLICY
If an address needs to be changed or updated, there will be a minimum charge of $10. This takes Verus time and resources to make the appropriate changes. We cannot guarentee that the address change will take place correctly but will do our best to facilitate it.
WARRANTY
Due to the nature of our business and the use of our parts, all of our products have a 1-year limited manufacturer defects warranty. If you have any questions regarding a warranty issue please do not hesitate to give us a call or shoot us a quick email.
TERMS AND CONDITIONS
All parts manufactured and sold under the Verus Engineering name are designed and manufactured with the intent to increase vehicle off-road performance and are not intended for use on public streets. Due to the nature of racing, all variances in conditions and use cannot be foreseen and therefore the safety of any person associated with use of our products is out of our control and we cannot be held liable for said event or any product failures due to unforeseen events or improper use or abuse when using products manufactured or sold by Verus Engineering.
Modification of any vehicle by installing parts manufactured by Verus Engineering could alter the vehicle’s on-road performance in the event of a crash, resulting in bodily harm or property damage. In purchasing any item from Verus Engineering, the purchaser hereby assumes full responsibility for any property damage or personal injury that may occur while using products manufactured and sold by Verus Engineering. Verus Engineering will not take responsibility for personal injury or property damage arising from usage or failure of parts manufactured and/or sold by Verus Engineering.
Do not purchase or install any part manufactured or sold by Verus Engineering if you do not agree with the above terms, and that you do not feel competent in installing safely and correctly. Improper installation or manufacturing procedures of DIY components can lead to personal injury or death, or property damage; a qualified professional should install all products, only skilled individuals should complete all DIY parts. Verus Engineering reserves the right to change pricing, material specifications, or any other specifications associated with their products without prior notification.
[/expand]
Reviews
There are no reviews yet.