Description
OVERVIEW
Our Dive Planes for the Fiesta ST were specifically designed to add a slight bump in front-end downforce while being drag neutral and is safe to be used with or without our Fiesta ST rear diffuser.
Dive planes also referred to as canards, allow you to shift the aero balance forward, aiding you and your setup in balancing out a large rear wing or diffuser.
Dive planes also help seal the sides of the car and help evacuate air from the wheel well, further reducing lift and drag in some cases.
These units are constructed from pre-preg, autoclaved cured, 2×2 twill carbon, that is polished to a high gloss shine.
WHAT IS INCLUDED
Dive Plane, Left-Hand
Dive Plane, Right-Hand
3M VHB Doubled-Sided Tape, Cut to Shape (2)
BTemplate (2)
Hardware Kit, Includes All Necessary Hardware for Install
FEATURES
Reduce Lift (Increase Downforce)
Shift Aero Balance Forward
Allows for Fine Tuning of Aero Balancing (Forward Biased)
Help Seal Sides of Car
Evacuate Air From the Front of the Wheel Well
SPECIFICATIONS
CFD Optimized Design
Pre-Preg, 2×2 Twill, Autoclave Cured, Carbon Fiber Composition
3M Double-Sided Tape or Bolt-On Install
Stainless Hardware Used Throughout
Install Template Included
SCIENCE
The Verus Engineering 300mm Rear Wing kit was specifically designed for the Porsche enthusiast who wants more rear-end downforce for track days. The airfoil profile was run through ANSYS Adjoint solver to improve its efficiency. Through this iterative improvement process, we were able to improve the wing profile’s performance. The wing was specifically placed to improve performance and create a good aero balance with the rest of the Verus Engineering Ventus 2 kit. The Ventus 2 kit produces a significant increase in downforce generated vs. the factory car and will reduce lap times substantially.
Our CFD data and our real-world experimental data matched well with the rear wing. The wing hit all the major goals we set forth to achieve first in our CFD simulations and then with our real-world testing. The strong correlation between CFD data and real-world testing validates both our CFD analysis approach and the wing’s performance.
[expand title=”Click here to read more about Verus Engineering Shipping and Warranty”]
Please contact first to see if we can assist with any issue you have encountered.
SHIPPING
Verus Engineering ships via FedEx and USPS, both domestically and internationally. Estimated delivery times for domestic FedEx shipments are explained in above image.
TRACKING
Verus Engineering sends an email with tracking number for every order placed with a valid email address. Tracking is sent *to the email used during checkout* directly via the carriers. Please check your spam folders and/or your email specifically used during checkout.
ADDRESS CHANGE POLICY
If an address needs to be changed or updated, there will be a minimum charge of $10. This takes Verus time and resources to make the appropriate changes. We cannot guarentee that the address change will take place correctly but will do our best to facilitate it.
WARRANTY
Due to the nature of our business and the use of our parts, all of our products have a 1-year limited manufacturer defects warranty. If you have any questions regarding a warranty issue please do not hesitate to give us a call or shoot us a quick email.
TERMS AND CONDITIONS
All parts manufactured and sold under the Verus Engineering name are designed and manufactured with the intent to increase vehicle off-road performance and are not intended for use on public streets. Due to the nature of racing, all variances in conditions and use cannot be foreseen and therefore the safety of any person associated with use of our products is out of our control and we cannot be held liable for said event or any product failures due to unforeseen events or improper use or abuse when using products manufactured or sold by Verus Engineering.
Modification of any vehicle by installing parts manufactured by Verus Engineering could alter the vehicle’s on-road performance in the event of a crash, resulting in bodily harm or property damage. In purchasing any item from Verus Engineering, the purchaser hereby assumes full responsibility for any property damage or personal injury that may occur while using products manufactured and sold by Verus Engineering. Verus Engineering will not take responsibility for personal injury or property damage arising from usage or failure of parts manufactured and/or sold by Verus Engineering.
Do not purchase or install any part manufactured or sold by Verus Engineering if you do not agree with the above terms, and that you do not feel competent in installing safely and correctly. Improper installation or manufacturing procedures of DIY components can lead to personal injury or death, or property damage; a qualified professional should install all products, only skilled individuals should complete all DIY parts. Verus Engineering reserves the right to change pricing, material specifications, or any other specifications associated with their products without prior notification.
[/expand]
Reviews
There are no reviews yet.