Action Clutch Stage 4 Clutch Kit (1MD) for Nissan 240SX 1989-1998 2.0L (SR20DET) Turbo with SR20DET Swap RWD

$359.96

Need this shipped internationally? Please click here to Contact Us.

Ships directly from Action Clutch warehouse. 48-72 hour prep time for in stock items. Any questions, please click here to Contact Us.

5 in stock (can be backordered)

Description

Action Clutch’s Stage 4 (1MD) Clutch Kit is designed to withstand even the most challenging conditions. Featuring a heavy-duty single diaphragm pressure plate, reinforced drive straps, and an Unsprung MIBA Ceramic (available in a 4 or 6 puck) disc, this kit provides peak performance and extreme durability for low/mild horsepower vehicles. Our Unsprung MIBA Ceramic clutch kit provides quicker engagement and will introduce some clutch chatter, which will minimize after proper break-in. For those looking to take their dedicated race vehicles to the next level, the Stage 4 (1MD) Action Clutch Kit provides maximum control and power with little compromise on reliability.

At Action Clutch, every kit is quality checked by one of our experienced engineers (with over 60 years of collective experience) and signed off as safe before being released as a finished product. This gives you peace of mind knowing that your Action Clutch will perform consistently every time.

NOTE:?Purchasing the wrong type of clutch kit for your specific engine power output can result in premature clutch failure, damage to the transmission and void warranty eligibility. If you?re unsure what kit is right for you, contact Action Clutch direct.

170% INCREASED HOLDING CAPACITY OVER FACTORY KIT*
RACE APPLICATIONS / DRAG / ROAD / DRIFT RACING

This kit fits 1989-1998 Nissan 240SX transmissions with an SR20DET 2.0L and will not work with the factory KA24

Specifications

Product TypeStage 4 Clutch Kit (1MD)
Product Weight (lbs)
SFI1.1
 
What?s Included

  • Unsprung MIBA Ceramic 6 Puck Disc
  • Single Diaphragm HD Pressure Plate
  • Pilot Bearing / Bushing (when applicable)
  • Clutch Alignment Tool
  • Conventional Release Bearing

Break-in Requirements
500 street miles / Keep RPM?s under 4500, no more than half-throttle, no boost (if applicable).
Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity.

Disclaimers
Ceramic based clutch discs intend to increase the holding capacity and durability of the clutch as opposed to an increased life expectancy. Using a ceramic based material for easy street driving may contribute to premature wear of the clutch kit due to the harsher engagement and because of the higher tendency to slip the clutch during street driving.

Using a clutch kit with an unsprung clutch disc on a stock or lightly modified power engine that is daily/street driven vehicle can break the rivets on the clutch disc hub. Unsprung clutch kits are not designed for daily/street use or any constant on/off engagement environment. This can be compared to running a marathon in sandals vs a proper running shoe. If you were to run the marathon in sandals, you have no cushion or comfort and can cause injuries or wear you down faster than using proper running shoes.

*Increase in holding capacity is rated in Crank Torque, not Wheel Torque

SFI
SFI Spec 1.1 Replacement Flywheels and Clutch Assemblies

California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov

About Action Clutch

Over at Action, we build and take time to provide products that will outperform the competition.
Working alongside innovative tuners has built trust and security for our customers. A clutch is an important piece to the puzzle. Whether or not your car is making stock or high HP, all components of the clutch is a big factor.

 

Not sure what clutch is right for you? CLICK HERE 

 

[expand title=”Click here to read more”]

Proposition 65 WARNING : Some of the products sold through this website contain/ may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

The California Safe Drinking Water & Toxic Enforcement Act of 1986 (Prop 65)

History

In 1986, California voters approved an initiative to address concerns about exposure to toxic chemicals. That initiative became the Safe Drinking Water and Toxic Enforcement Act of 1986, commonly known as “Prop 65”.

Prop 65 requires the State of California to publish a list of chemicals known to cause cancer, birth defects, or other reproductive harm. This list, which must be updated at least once a year, has grown to include over 900 chemicals since it was first published in 1987.

Prop 65 requires businesses to provide Californians with a clear and reasonable warning about chemicals in the products they purchase, in their home or workplace, or that are released into the environment. By providing this information, Prop 65 enables Californians to make informed decisions about protecting themselves from exposure to these chemicals. Prop 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water.

The Office of Environmental Health Hazard Assessment (OEHHA) administers the Prop 65 program. OEHHA, which is part of the California Environmental Protection Agency (Cal/EPA), also evaluates all currently available scientific information on substances considered for placement on the Prop 65 list.

What This Means To You

While the proposition was created to protect drinking water sources from chemical contamination, the scope of the law has expanded over the years. It now includes over 900 chemicals and also pertains to (but is not limited to) exposure through touch, inhalation, ingestion, or skin contact.

The Prop 65 warning can now be found on products that may contain a small amount of over 900 chemicals or ingredients that the OEHHA lists as a carcinogen or reproductive toxicant. This includes vinyl, coatings, plastics, and much more.

Many of the elements listed under Prop 65 are common everyday additives found in products like electrical wire, cable, coated fabrics, steering wheels, shoes, gloves, tonneau covers, bed liners, oil filter wrenches, brake pads, floor mats, etc.

Because of the vast array of products that might contain one of the chemicals or ingredients on the list, we must include Prop 65 warnings in our communications with you. We are required to use exact wording as specified by the state of California.

While the warning sounds alarming, the purpose is to notify you of the potential risk so that you can make an informed buying decision.

You can find more information here. The California Office of Environmental Health Hazard Assessment, OEHHA, maintains a comprehensive website at www.P65Warnings.ca.gov This website explains the law and offers a list of all the chemicals and materials.[/expand]

Additional information

Dimensions13 × 13 × 4 in

Brand

Action Clutch

Reviews

There are no reviews yet.

Be the first to review “Action Clutch Stage 4 Clutch Kit (1MD) for Nissan 240SX 1989-1998 2.0L (SR20DET) Turbo with SR20DET Swap RWD”
Make Model Year_ Trim
Nissan 240SX 1989 All Trims
Nissan 240SX 1990 XE 2dr Coupe
Nissan 240SX 1990-1993 SE 2dr Hatchback
Nissan 240SX 1991 Limited 2dr Hatchback
Nissan 240SX 1991-1992 LE 2dr Hatchback
Nissan 240SX 1991-1993 2dr Hatchback
Nissan 240SX 1991-1993, 1995-1998 2dr Coupe
Nissan 240SX 1991-1993, 1995-1998 SE 2dr Coupe
Nissan 240SX 1992-1994 SE 2dr Convertible
Nissan 240SX 1997-1998 LE 2dr Coupe